Services
Chimney & Masonry Services in Dayton
Chimney repairs, tuckpointing, masonry restoration and brick, block and stone work across Dayton, Ohio, diagnosed properly and finished clean before a fixed price goes on paper.
Chimney Repairs in Dayton
Cracked crowns, spalling brick, failing mortar joints and leaning stacks, worked on top-down so the chimney is sound again.
What's included
- Crown repair and rebuilding
- Spalling brick replaced
- Mortar joint repairs
- Flashing repaired or replaced
- Leaning or cracked stacks rebuilt
- Chimney caps fitted or replaced
A chimney rarely fails all at once. It starts with a cracked crown letting water in, a mortar joint that's washed out, or brick that's started to spall from freeze-thaw damage. We get up on the roof, find where the water is actually getting in, and work out what's causing it rather than just patching the obvious spot.
Repairs are carried out from the top down: crown, cap and flashing first, then the brickwork and mortar below. Where the stack has started to lean or crack structurally we rebuild the affected courses rather than skim over them, so the fix holds.
Tuckpointing in Dayton
Old mortar cut out to the right depth and repacked joint by joint, so the wall or chimney stops taking on water.
What's included
- Old mortar cut out and repacked
- Mortar colour matched to existing
- Loose or crumbling brick reset
- Chimney and wall joints covered
- Weatherproofing checked after work
Mortar wears out long before the brick around it does. We cut out the old, failed mortar to a consistent depth, clean the joint, and repack it with fresh mortar mixed to match the colour of what's already there.
It's used on chimneys, walls and any brickwork where the joints have started to crumble or wash out. Done properly it stops water getting behind the brick face, which is usually what's causing the bigger, more expensive damage further down the line.
Masonry Restoration in Dayton
Aged brick, block and stone cleaned, repaired and rebuilt where it has failed, brought back to a safe, solid state.
What's included
- Damaged brick and block replaced
- Stonework cleaned and repaired
- Structural cracks addressed
- Matched to existing material
- Sealing and weatherproofing
Older brick, block and stone takes a beating from Dayton winters. We assess what's actually failed, replace brick and stone that's cracked or spalling, and reset or repoint the sections around it so the whole wall or stack is structurally sound again.
Wherever possible we match new material to what's already on the house, so a repaired section doesn't stand out. Where damage is more serious, we'll tell you straight rather than patch over a problem that's going to come back.
Brick & Block Work in Dayton
New brick and block laid or existing work repaired, built square, level and finished clean.
What's included
- New brick and block walls built
- Existing brick and block repaired
- Footings laid for new work
- Brick and mortar colour matched
- Site left clean and tidy
Whether it's a new wall, a garden feature or repair work on an existing structure, brick and block goes in plumb, level and properly tied together. We lay footings where new work needs them and match brick and mortar colour to existing work where we're tying into it.
Repairs are treated the same way as new build, cracked or shifted block cut out and replaced rather than filled over. Site is kept tidy while we work and cleared properly once the job's done.
Stone Work in Dayton
Stone repaired, reset or newly laid on chimneys, walls and features, fitted tight and built to last.
What's included
- Stone repair and resetting
- New stone installation
- Chimneys, walls and features
- Stone and mortar matched
- Structural repairs where needed
Stone on chimneys, walls and features gets reset where it's shifted, replaced where it's damaged, or installed fresh where you want it. Joints are packed tight and matched to the existing stone and mortar so the finished work sits properly.
Where stonework is doing a structural job, holding up a chimney breast or a retaining wall, we check what's happening behind the face before starting, so the repair actually fixes the cause rather than the symptom.
Chimney & Masonry Surveys in Dayton
A full look at your chimney or masonry, top to bottom, before you spend a penny on repairs.
What's included
- Chimney crown and cap checked
- Mortar joints inspected
- Brick and stone condition assessed
- Flashing and weatherproofing checked
- Fixed written quote provided
Before any work starts we come out and look properly, crown, cap, flashing, mortar joints and the brick or stone itself. It's a straightforward visual and physical check to find out what's actually wrong, not a sales visit.
You get a plain explanation of what we found and a fixed written quote before anything's agreed. If there's nothing wrong, we'll tell you that too.
How It Works
Three steps, no pressure
1
Call or message
Tell us what's wrong, or what looks off, with your chimney or masonry. We'll ask enough to know whether we need to come and look.
2
Free survey & fixed quote
We come out, check the chimney or masonry properly, and give you a fixed price in writing before anything starts.
3
The work
The job's carried out to the standard we're happy to put our name to, and the site's left clean when we're done.